Cloud-electronics PS16 User Manual download pdf (Page 4)

Pump Station 16-R: Installation and operation manual 3

4 Schematic Diagram

Pump Station 16-R & Sub Station 16-R

5 Installation

The Cloud Pump Station 16-R is suitable for mounting in a standard 19” equipment rack where

it will occupy two units of rack space. The Pump Station 16-R is 170mm deep, but a depth of

235mm should be allowed to clear the rear panel connectors. When possible, avoid positioning

the unit in close proximity to magnetic fields or equipment operating at a high temperature. The

Pump Station 16-R operates from an external plug-top transformer and a provision should be

made to plug this into a suitably positioned power socket. The Pump Station 16-R is fitted with

an RJ45 socket for each remote control unit; terminate using eight core category 5 cable (4 pair

Cat 5). The total cable length from an RH-8 to the rack should not exceed 100m (328ft).

6 RH-8 Installation

When installing the RH-8 we suggest that an RJ45 data socket is

floor mounted adjacent to each one. Wire each data socket

individually back to the equipment rack pin to pin using CAT 5

cable. The RH-8 is fitted with an RJ45 compatible data socket

and supplied with a 3m patch cord to link to the floor mounted

data socket; this approach simplifies maintenance.

Cable Information for Wiring the RH-8 to a Floor Socket

RH-8 (RJ45) Pump Station 16-R (RJ45) CAT 5*

Pin 8 Pin 8 Brown/White

Pin 7 Pin 7 White/Brown

Pin 6 Pin 6 Green/White

Pin 5 Pin 5 White/Blue

Pin 4 Pin 4 Blue/White

Pin 3 Pin 3 White/Green

Pin 2 Pin 2 Orange/White

Pin 1 Pin 1 White/Orange

16-07-02 V2.1

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Cloud-electronics PS16 User Manual Page 4