Cloud-electronics PS16 User Manual download pdf (Page 3)

2 Pump Station 16-R: I

NSTALLATION AND OPERATION MANUAL

1 Safety Notes

• Do not expose this unit to water or moisture

• Do not expose the unit to naked flames.

• Do not block or restrict any air vent

• Do not operate the unit in ambient temperatures above 35

• The unit has no internal user adjustable parts. Do not remove any panel.

• Refer any servicing to qualified service personnel.

• Do not replace the power transformer with any other type

For more detailed information refer to the rear of the manual.

2 General

The Cloud Pump Station 16-R is a headphone distribution processor primarily designed to

provide headphone monitoring of up to eight stereo sound sources to a person using exercise

machines. The Pump Station 16-R has eight stereo line inputs and a balanced ‘global’ input

with priority.

A total of 16 remotely located ‘RH-8’ or ‘WP-8’ remote control units can be wired to the Pump

Station 16-R – the ‘RH-8’ is fitted with a headphone socket, rotary source select switch and

volume control and can be fitted to the exercise machine or wall mounted. The WP-8 however

is a dedicated wall-mounting version of the RH-8 with the provision to connect low power

speakers.

Eight core Category 5 (Cat 5) cable should be used to wire each remote control unit to the

Pump Station 16-R. The RH-8 comes supplied with an RJ45 patch cable that can be

terminated into any RJ45 socket (commonly used as part of a computer network).

A remote music mute facility is also provided on the Pump Station 16-R that may be used to

satisfy the requirements of the Local Fire Officer.

The Sub Station 16-R provides the capacity to add up to sixteen extra RH-8 or WP-8 remote

control devices; the Pump Station 16-R can drive up to 15 Sub Station 16-R units providing a

maximum capacity of 256 control panels. A multi-core expansion cable is supplied with each

unit and the system is wired in the ‘daisy chain’ configuration.

The front panel controls on both units are reduced to a power switch, all the input and output

terminations and gain controls are mounted on the rear panel. The unit can be positioned in a

protected area with just the remote control units positioned in the most appropriate location.

3 The RJ45 Connection

The RJ45 plug is a compact 8-pole connector primarily designed for CAT5

cable. Special tools are available making termination both easy and quick.

1) Strip approximately 1” of outer sheath from the cable.

2) Remove extraneous material such as plastic wrap or foil screen from the

8 exposed cores but do not strip their sheaths.

3) Cut the 8 exposed cores down so that when the cable is inserted into the

RJ-45 the outer core can be held by the plugs cable retention system.

4) Insert the 8 cores into the RJ-45 plug fully making sure that they are all

correctly arranged. Information on the correct arrangement of cores for

the RH-8 can be found in section 6 and the WP-8 details are in section 7.

5) Place the plug/cable assembly into the assembly tool and operate the

mechanism.

6) You should now have a firmly connected plug/cable assembly that is

ready for installation.

These notes are for guidance only: always follow the instructions supplied with the assembly tool

16-07-02 V2.1

1 2 3 4 5 6 7 8 ... 11 12

Comments to this Manuals

No comments

Cloud-electronics PS16 User Manual Page 3

Comments to this Manuals

Related products and manuals for Audio Cloud-electronics PS16